DRYMIX MORTAR SERIES
CPL-551
BASE PLASTER
Usage Calculator
*The calculated results are for reference only. Please reach out to our team for further assistance.
PRODUCT USES
Skim coat base layer with high adhesive strength
Ceiling Thin Plastering
Exterior and Interior Thin Wall Plastering
Panel Wall Thin Rendering
PRODUCT BENEFITS
Shrinkage
compensated
Helps reduce the risk of shrinkage cracks during curing.
Mould and water resistant
Provides dependable resistance in dry, wet, interior and exterior environments.
System
compatible
Compatible with cement-, gypsum- and lime-based materials and skim coat systems.
Designed for spray application
Specifically formulated for thin spray plastering and can be directly loaded into a spraying machine.
Paint-ready skim coat base
Suitable as a skim coat to receive paint in exterior conditions.
PERFORMANCE DATA SHEET
Adhesion to Concrete - Initial adhesion strength | (EN 1015-12) | > 1.5 N/mm² |
Adhesion to Concrete -Adhesion strength after heat ageing | (EN 1015-12) | > 1.0 N/mm² |
Adhesion to Concrete -Adhesion strength after water immersion | (EN 1015-12) | > 1.0 N/mm² |
Adhesion to Concrete -Adhesion strength after freeze-thaw cycle | (EN 1015-12) | > 1.5 N/mm² |
Compressive Strength | (EN 1015-11) | > 10.0 N/mm² |
Flexural Strength | (EN1015-11 & BS 6319 : Part 3 : 1990) | > 3.0 N/mm² |
Water Retentivity | (BS 4551-1) | ≥ 99% |
Water Resistant (>96 hours) | (JG/T 157-2009) | No anomalies found |
Alkali Resistant (>48 hours) | (JG/T 157-2009) | No anomalies found |
Shrinkage | (Coutinho ring, HKHA MTS (2012/2014) Spec. Part D, 2.1.6) | Nil |
Formaldehyde | (GB 18582-2008) | < 20 mg/kg |
Note | *Unless specified, all technical data refers to 28 days curing time |
Above physical data are from laboratory tests. Actual field performance may vary due to environmental conditions and workmanship factors beyond the manufacturer's control.