DRYMIX MORTAR SERIES
CFL-680
Top Leveler
A versatile cement-based self-leveling floor surfacing system, suitable for both machine and hand application. This product is designed specifically for creating a smooth overlay on concrete floors. The product allows for allows for quick access to the surface—typically within 2 to 3 hours for light foot traffic and full load capacity after 7 days. It contains no protein-based additives, making it non-toxic and particularly suited for use in hygiene and environment-sensitive areas.
Usage Calculator
*The calculated results are for reference only. Please reach out to our team for further assistance.
PRODUCT USES
Superior abrasion resistance (AR 0.5), quick setting chemical resistant
Suitable for car parks and warehouses
For factories, hospitals, and schools
Sports stadiums and theatres
PRODUCT BENEFITS
Water & Chemical Resistance
Handles water spills and chemical exposure like dense concrete.
Fast Machine
Application
Up to 300 m²/hour; direct paint/epoxy coating compatibility.
Low pH &
Eco-Friendly
Less aggressive to finishes with no protein-based superplasticizer.
Superior Abrasion & Durability
Withstands heavy forklift and vehicle traffic with high wear resistance.
Rapid Setting &
Fast Drying
Foot traffic in 2 hours; top coating ready in 2 days.
PERFORMANCE DATA SHEET
Adhesion to Concrete | (EN 13892-8, JC/T 985) | 1.5 N/mm² |
Compressive Strength - 1 day | (EN 13892-2, JC/T985) | >20 N/mm² |
Compressive Strength - 3 day | (EN 13892-2, JC/T985) | >30 N/mm² |
Compressive Strength - 7 days | (EN 13892-2, JC/T985) | >35 N/mm² |
Compressive Strength - 28 days | (EN 13892-2, JC/T985) | >45 N/mm² |
Flexural Strength | (EN 13892-2) | ≥ 9 N/mm² |
Abrasion Resistance (BCA method) | (EN 13892-4) | Class AR0.5
≤ 50μm |
Flow Ring Test | (EN 12706) | > 140 mm |
Free shrinkage/Air-cured | (EN 13454-2) | < 0.05% |
pH Value | (EN 12859) | ≤ 10 |
Above physical data are from laboratory tests. Actual field performance may vary due to environmental conditions and workmanship factors beyond the manufacturer's control.