DRYMIX MORTAR SERIES
CWE-338
WP Resilience Slurry
A two-component, latex-modified cementitious coating. It is easily prepared by mixing a pre-packaged dry powder with a specially formulated flexible latex admixture. The resulting slurry can be applied to various substrates. This product offers exceptional protection, exhibiting excellent resistance to water, aggressive chemicals, long-term weathering, and abrasion. Best for prolonged water immersion.
Usage Calculator
*The calculated results are for reference only. Please reach out to our team for further assistance.
PRODUCT USES
High elastic waterproofing membrane 100% elongation for kitchens and bathrooms
Seals walls and floors with GREENTECH products
Works on positive and negative sides of water recieving substrates
Withstands shrinkage, vibration, movement, cracking.
For tunnels, basements, tanks, pools, balconies
PRODUCT BENEFITS
High Humidity Application
Applicable under high humidity environments.
Prepacked Fixed Proportion
Ensures quality with consistent mixing ratios.
Rough Surface
Enhances Adhesion
Provides coarse surface for better bonding strength.
User-friendly
Formulation
Provides easy handling and convenient application.
Suitable for
Complex Surfaces
Applies easily on complex surfaces and shapes.
PERFORMANCE DATA SHEET
Solid Content | GB/T 23445 : 2009 | >70% |
Tensile Strength | ASTM D412 | >1.1 N/mm2 |
Elongation at Break | ASTM D412 | 220% |
Initial Tensile Strength | GB/T 23445 : 2009 Cl. 7.4.3 & GB/T 16777 Cl. 9.2.1 | >1.5 N/mm2 |
Tensile Strength after heat ageing | GB/T 23445 : 2009 Cl. 7.4.4 & GB/T 16777 Cl. 9.2.1 | >2.0 N/mm2 |
Tensile Strength after Alkaline Treatment | GB/T 23445 : 2009 Cl. 7.4.5 & GB/T 16777 Cl. 9.2.1 | >1.3 N/mm2 |
Tensile Strength after water immersion | GB/T 23445 : 2009 Cl. 7.4.6 & GB/T 16777 Cl. 9.2.1 | >1.2 N/mm2 |
Adhesion Strength to concrete (under moisture condition) | GB/T 23445 : 2009 Cl. 7.6.3.2 | 0.8 N/mm2 |
Water Impermeability | GB/T 23445 : 2009 Cl. 7.7 & GB/T 16777 Cl. 15 w/ modification | Passed 0.3 MPa for 30 minutes |
Water Impermeability Pressure | GB/T 23445 : 2009 Annex A w/ modification | Passed 0.5 MPa |
Water Permeability (Penetration) Test | DIN 1048 Cl. 7.6 | 0 mm |
Note | Unless specified, all technical data refers to 28 days curing time |
Above physical data are from laboratory tests. Actual field performance may vary due to environmental conditions and workmanship factors beyond the manufacturer's control.