CWE-318
WP Rigid Slurry
DRYMIX MORTAR SERIES
A two-part cementitious coating system that incorporates latex. It is prepared by blending a pre-packaged dry powder component with a formulated liquid latex additive. This mixture can then be applied as a slurry coating onto various substrates. The product is particularly suited for use on structures that will be subjected to prolonged water immersion conditions.
Usage Calculator
*The calculated results are for reference only. Please reach out to our team for further assistance.
PRODUCT USES
High strength rigid waterproofing membrane, suitable for internal and external areas
Seals walls and floors with GREENTECH products
Underlayer waterproofing for tiling installations
For exterior, interior walls, brickwork, floors
Use in bathrooms, kitchens, and balconies
PRODUCT BENEFITS
Easy
Application
Easy to apply on complex surfaces and shapes.
Prepacked Fixed Proportion
Ensures quality with consistent mixing ratios.
Non-Toxic &
Eco-Friendly
Safe to use with anti-carbonate protection.
High Adhesive
Strength
Suitable for tiling underneath waterproofing layers.
High Humidity
Application
Applicable under high humidity environments.
PERFORMANCE DATA SHEET
Adhesion Strength | EN 1015 Part 12 | > 1.0 N/mm² |
Compressive Strength | EN 1025-11 | > 15 N/mm² |
Flexural Strength | EN 1025-11 | > 5 N/mm² |
Initial Surface Water Absorption (ISAT) | BS 1881 Part 208 | < 0.01 ml/m²/s |
Water Impermeability | (GB23445-2009)
Head of water, 0.3 MPa for 30 min | Watertight
5 bar |
Water Permeability (Penetration) Test | (GB23445-2009)
Head of water on the negative side | > 0.8 N/mm² |
Note | Unless specified, all technical data are average values and refer to 28 days curing time. |
Above physical data are from laboratory tests. Actual field performance may vary due to environmental conditions and workmanship factors beyond the manufacturer's control.