DRYMIX MORTAR SERIES
CTF-728
Mosaic Fix
A premium cementitious, waterproof, single-component 2-in-1 tile adhesive and tile grout. It can have different colour to match different mosaics style. Perfectly tailored for the installation of mosaic tiles, it aligns with traditional mosaic methods, allowing for efficient tiling and grouting in a single step. The product has active ingredient which can effectively prevent formation of efflorescence.
Usage Calculator
*The calculated results are for reference only. Please reach out to our team for further assistance.
PRODUCT USES
Can be used for mosaic fixing and grouting with matching mosaic colours.
Tiling and grouting 2-in-1 for mosaic application
Tiling for ceramic tiles smaller than 45 x 95 mm
Interior and exterior
wall tiling
Tiling on GREENTECH primed substrates
Shrinkage
compensated
Helps reduce the risk of shrinkage cracks during curing.
Customisation
Options
Different colour to match different mosaic style
Prevent
Efflorescence Formation
Formula enhances long term durability.
One
Component
Formulation ensures fixed mixing proportions for one step tiling and grouting.
Non-Slip
Properties
Designed for enhanced safety.
PERFORMANCE DATA SHEET
Adhesion to Concrete - Initial adhesion strength | EN 1348: 2007 / ISO 13007-2:2005 & JC/T 547:2005) | > 1 N/mm² |
Adhesion to Concrete - Adhesion strength after heat ageing | EN 1348: 2007 / ISO 13007-2:2005 & JC/T 547:2005) | > 1 N/mm² |
Adhesion to Concrete - Adhesion strength after water immersion | EN 1348: 2007 / ISO 13007-2:2005 & JC/T 547:2005) | > 1 N/mm² |
Adhesion to Concrete - Adhesion strength after freeze-thaw cycles | EN 1348: 2007 / ISO 13007-2:2005 & JC/T 547:2005) | > 1 N/mm² |
Abrasion Resistance | EN 12808 : 2007 | < 1,000 mm³ |
Compressive Strength - After dry storage | EN 12808 : 2007 Part 3 | > 15 N/mm² |
Compressive Strength - After freeze-thaw cycle | EN 12808 : 2007 Part 3 | > 15 N/mm² |
Flexural Strength - After dry storage | EN 12808 : 2007 Part 3 | > 2.5 N/mm² |
Flexural Strength - After freeze-thaw cycle | EN 12808 : 2007 Part 3 | > 2.5 N/mm² |
Linear Shrinkage - After 24 hours | ANSI A118.6, EN12808-4 | < 2 mm/m |
Linear Shrinkage - After 7 days | ANSI A118.6, EN12808-4 | < 2 mm/m |
Linear Shrinkage - After 28 days | ANSI A118.6, EN12808-4 | < 2 mm/m |
Water Absorption - After 240 mins | EN12808-5 | < 5 g |
Water Absorption 50% R.H. to immersion to dry | ANSI 118.6 | < 5% |
Water Absorption - After 30 mins | EN12808-5 | < 2 g |
Resistance to Mould Growth | BS 5980 | No mould growth |
Resistance to Efflorescence | (JC/T 1024:2019) | No efflorescence |
Note | Unless specified, all technical data refers to 28 days curing time |
Above physical data are from laboratory tests. Actual field performance may vary due to environmental conditions and workmanship factors beyond the manufacturer's control.