DRYMIX MORTAR SERIES
CPL-561
Wall Finish
A high-quality water-resistant cement-based thin plaster especially designed for thin plastering or surface improvement works to concrete and block walls or as a final coat on plastering surface. Excellent durability and stability under different weathering conditions.
Usage Calculator
*The calculated results are for reference only. Please reach out to our team for further assistance.
PRODUCT USES
Sprayable external skim coat with high adhesive strength
.png)
Interior and exterior thin wall plastering
Precast panel thin wall plastering
Ceiling thin plastering
PRODUCT BENEFITS
Thin Spray
Application
Specifically designed for spray plaster installations.
Mould and water resistant
Provides dependable resistance in dry, wet, interior and exterior environments.
Compatible
Qualities
Compatible with cementitious building products and suitable as finishing skim coat.
One
Component
Pre-determined mixing ratio - ensures consistent, high-quality results
Paint-ready skim coat base
Suitable as a skim coat to receive paint in exterior conditions.
PERFORMANCE DATA SHEET
Adhesion to Concrete - Initial adhesion strength | EN 1015-12 | > 1.0 N/mm² |
Adhesion to Concrete - Adhesion strength after heat ageing | EN 1015-12 | > 0.7 N/mm² |
Adhesion to Concrete - Adhesion strength after water immersion | EN 1015-12 | > 0.7 N/mm² |
Adhesion to Concrete - Adhesion strength after freeze-thaw cycle | EN 1015-12 | > 0.7 N/mm² |
Water Retentivity | BS 4551-1 | ≥ 99% |
VOC Content | USEPA Method 24 | < 10 g/L |
Formaldehyde Content | GB 18582-2008 Appendix C | < 10 mg/kg |
Flexural Strength | EN 1015-11 | ≥ 3.0 N/mm2 |
Compressive Strength | EN 1015-11 | ≥ 7.0 N/mm2 |
Mould Resistance | BS 5980 : 1980 Appendix B | No mould growth |
Free Shrinkage | HKHA/MTS (2020/2022)
Specification Part D Clause 2.1.20 | Nil |
Note | * Unless specified, all technical data refers to 28 days curing time |
Above physical data are from laboratory tests. Actual field performance may vary due to environmental conditions and workmanship factors beyond the manufacturer's control.