DRYMIX MORTAR SERIES
CPL-560 Wall Skim
A ready-mixed skim coat as thin and final coat on wall and ceiling, or on plastering substrates. It is a water resistant skim coat which can be used in dry or wet interior areas to receive paint. It can be applied by hand on concrete, lightweight concrete, blockwork and rendered substrates but not on painted surfaces.
Usage Calculator
*The calculated results are for reference only. Please reach out to our team for further assistance.
PRODUCT USES
Sandable internal skim coat to receive paint
Skim coat for interior wall and ceiling
Receive paint and wall paper
Can be used on plastering substrates
Used on various boards and surfaces
PRODUCT BENEFITS
.jpg)
Good
Workability
Allowing for efficient work processes.
Mould, alkali, and water resistant
Provides dependable resistance in dry or wet environments.
Material
Compatibility
Compatible with cement-,based building products.
One
Component
Pre-determined mixing ratio - ensures consistent, high-quality results
Sandable
Product
Sanding to get the smooth surface
PERFORMANCE DATA SHEET
Adhesion to Concrete - Initial adhesion strength | EN 1015 Part 12, HKHA MTS FIN M790.C | ≥ 0.6 N/mm² |
Adhesion to Concrete - Adhesion strength after water immersion | EN 1015 Part 12, HKHA MTS FIN M790.C | ≥ 0.5 N/mm² |
Compressive Strength | EN 1015 Part 11 | ≥ 5 N/mm² |
Flexural Strength | EN 1015 Part 11 | ≥ 2 N/mm² |
Water Retentivity | BS 4551 | ≥ 99% |
Mould Resistance | BS 5980 : 1980 Appendix B | No mould growth |
Free Shrinkage | HKHA/MTS (2020/2022)
Specification Part D Clause 2.1.20 | Nil |
VOC Content | USEPA Method 24 | < 10g/kg |
Formaldehyde Content | GB 18582-2008 Appendix C | < 10 mg/kg |
Note | Unless specified, all technical data refers to 28 days curing time |
Above physical data are from laboratory tests. Actual field performance may vary due to environmental conditions and workmanship factors beyond the manufacturer's control.