GREENTECH

Gypsum Skim Coat GS-80

GREENTECH GYPSUM SKIM COAT (GS-80) is a high quality gypsum based thin skim coat plaster for application on GREENTECH Gypsum Blocks, brick walls, block walls, panel walls and concrete surfaces in interiors to provide a rigid and smooth surface to receive decorative finish. It is specially formulated for thin layer masonry within 0.5-3mm thick per coat.

Gypsum Skim Coat GS-80 for Gypsum Block

Features and Benefits

  • Solves the problem of shrinkage cracking
  • Superior paint and substrate adhesion
  • Smooth, seamless surface ready to receive decorative treatment
  • Fast curing to receive succeeding coats
GREENTECH GS-80 Gypsum Skim Coat

ADVANTAGE

SOLVES THE PROBLEM OF
SHRINKAGE CRACKING

SOLVES THE PROBLEM OF
SHRINKAGE CRACKING

GS-80 exhibits excellent shrinkage properties. The shrinkage during curing is totally negligible which avoids cracking and appearance of shrinkage marks.

SUPERIOR PAINT AND
SUBSTRATES ADHESION

SUPERIOR PAINT AND
SUBSTRATES ADHESION

GS-80 exhibits excellent bonding to various substrates and can be applied onto GREENTECH Gypsum Block and other masonry surfaces directly. This ensure the durability for the decorative finishes such as paint and wall papers.

SMOOTH & SEAMLESS
SURFACE FOR DECORATION

SMOOTH & SEAMLESS
SURFACE FOR DECORATION

GS-80 is mainly comprised of fine gypsum. It is easy to sand to achieve a highly smooth surface which is suitable to receive paint and wall paper directly.

FAST CURING TO RECEIVE
SUCCEEDING COATS

GS-80 sets quickly. Decorative finishes can be started on top as short as 24 hours after completion of this coat.

We aim to facilitate continuous improvement of our current products alongside the continual growth of our product line. 

Please contact us for any inquiries regarding GREENTECH products.

SPECIFICATION

SERIESGS-80
Packing30 kg/bag
Water Demand / Water RatioApprox. 46%-50% / 13.8-15L
CoverageApprox. 1.0kg/m2/mm
Thickness0.5 – 3 mm / coat
Working Time (Approx.)120 mins
Storage Life8 Months
Flexural Strength (BS EN 13279-2)> 2 MPa
Compressive Strength (BS EN 13279-2)> 5 MPa
Adhesive Strength (BS EN 13279-2)> 0.5 MPa
* Above data are based on tests conducted at standard conditions according to the captioned test methods and our standard drawings.
For other special conditions, please consult our representative. 

CASES STUDY