GREENTECH

Gypsum Plaster GP-2L

GREENTECH Gypsum Plaster (GP-2L) is a high-coverage sprayable gypsum-based plaster directed for use on surfaces not limited to GREENTECH Gypsum block walls, brick walls, block walls, panel walls, and concrete as a render coat.  Thoroughly leveled surfaces of desired thicknesses can be achieved upon utilization of GP-2L with both sprays or trowels.  It is formulated as a render coat with 5 to 20 mm thick per coat.

Features and Benefits

  • Fast curing to receive succeeding coats
  • Efficient application
  • Improved surface finish
  • Excellent workability and coverage

ADVANTAGE

FAST CURING TO RECEIVE
SUCCEEDING COATS

GP-2L sets quickly (i.e., within 90-100 mins). succeeding coats (paint works, wallpaper etc.) can be started as short as 72 hours after completion of this plastering coat.

EFFICIENT
APPLICATION

GP-2L can be applied by both spray and trowel. It can be applied using spray in spacious area along with using a trowel narrow area without major difficulties.

IMPROVE
SURFACE FINISH

GP-2L can provide perfectly lined and levelled surface along with perfect right angle edges and curve wall surface with the aid of accessories. Besides, GP-2L can provide smooth finish with steel trowel or coarse finish with wooden float to receive succeeding coat.

EXCELLENT WORKABILITY
AND COVERAGE

GP-2L is easy to apply, either using spray or trowel. Its working time is sufficient for workers to adjust a perfect finish. With its excellent coverage, desired thickness can be achieved with minimized amount of material.

We aim to facilitate continuous improvement of our current products alongside the continual growth of our product line. 

Please contact us for any inquiries regarding GREENTECH products.

SPECIFICATION

SERIESGS-80
Packing25 kg/bag
Water Demand / Water RatioApprox. 52%-60% / 13-15L
CoverageApprox. 0.8kg/m2/mm
Thickness5 – 20 mm / coat
Working Time (Approx.)120 mins
Storage Life8 Months
Flexural Strength (BS EN 13279-2)> 2.2 MPa
Compressive Strength (BS EN 13279-2)> 5 MPa
Adhesive Strength (BS EN 13279-2)> 1 MPa
* Above data are based on tests conducted at standard conditions according to the captioned test methods and our standard drawings.
For other special conditions, please consult our representative. 

CASES STUDY